+
  • 步进移载V2.mp4
  • c1(1).jpg
  • c2.jpg

Residual pole transfer unit

The residual pole transfer unit is equipped with the acceptance, storage, transfer and output of the residual anode plate to the residual pole transport vehicle. The unit is mainly composed of No.1 transfer trolley, residual pole pile receiving plate rack, temporary storage rack, No.2 transfer trolley, transfer rail rack and electrical system.

Keywords: production equipment selection, system manufacturing, upgrading

Classification:

Smelting equipment

messages

Product Description

Product introduction:

The residual pole transfer unit is equipped with the acceptance, storage, transfer and output of the residual anode plate to the residual pole transport vehicle. The unit is mainly composed of No.1 transfer trolley, residual pole pile receiving plate rack, temporary storage rack, No.2 transfer trolley, transfer rail rack and electrical system.

 

Skill parameters:

Serial Number Project Name Technical parameters
1 Conveying capacity ~ 400 tablets/h
2 Weight of single residual pole ~120kg
3 Residual pole quantity of single transfer 20 pieces
4 Moving vehicle running speed 2~20m/min

Previous Page

Residual pole transfer unit English Russian test

Copper smelting plate transfer and intelligent storage system

Next Page

Previous Page

Residual pole transfer unit English Russian test

Next Page

Copper smelting plate transfer and intelligent storage system

Related Product Recommendation

Residual pole transfer unit English Russian test

Residual pole transfer unit English Russian test

The residual pole transfer unit is equipped with the acceptance, storage, transfer and output of the residual anode plate to the residual pole transport vehicle. The unit is mainly composed of No.1 transfer trolley, residual pole pile receiving plate rack, temporary storage rack, No.2 transfer trolley, transfer rail rack and electrical system.
Residual pole transfer unit

Residual pole transfer unit

The residual pole transfer unit is equipped with the acceptance, storage, transfer and output of the residual anode plate to the residual pole transport vehicle. The unit is mainly composed of No.1 transfer trolley, residual pole pile receiving plate rack, temporary storage rack, No.2 transfer trolley, transfer rail rack and electrical system.
Stirred tank

Stirred tank

The main features of CGJ series mixing equipment: the design adopts low speed, large impeller scheme, and is equipped with deflector and baffle structure design, so that the slurry flow forms a "W" flow direction, so as to achieve low energy consumption, low wear and tear, and effectively extend the overall life of the equipment.
Trough type washing machine

Trough type washing machine

The trough washing machine is used for the first stage of washing operation to scrub -50mm (or -20mm) materials (including mud) separated from the cylinder washing machine. Its main tasks are two: one is to wipe off the clay (or powder ore) that is larger than 2mm and adheres to the surface of the ore (or gravel); The second is to recover (or discard) suspended materials (clay or powder ore) less than the design requirements (such as-2mm) from overflow to discharge, the lump ore (or gravel) larger than the design requirement (such as 2mm) is separated and recycled (or discarded) by countercurrent.

online message

Submit immediately