+
  • b4324473-6369-417e-a527-020747ad30b3(1699258588579).jpg
  • b4324473-6369-417e-a527-020747ad30b3-2(1699258588579).jpg
  • b4324473-6369-417e-a527-020747ad30b3-3(1699258588505).jpg
  • b4324473-6369-417e-a527-020747ad30b3-4(1699258588664).jpg
  • b4324473-6369-417e-a527-020747ad30b3-5.jpg
  • b4324473-6369-417e-a527-020747ad30b3-6.jpg

CCF flotation column

CCF flotation column is a new type of high-efficiency non-mechanical stirring aerated flotation equipment with column tank structure. It uses the flow mode of ore particles and fine bubbles in countercurrent and smooth contact, which provides a large number of opportunities for collecting ore particles. The bubbles in the column are small and uniform, the surface area is large, and there are more opportunities to contact with the ore particles under countercurrent conditions, which eliminates the "short circuit" phenomenon of useful minerals in the flotation process, and is conducive to improving the flotation speed and recovery rate. The thickness of the foam layer in the column is large, adjustable, and the cleaning effect of countercurrent flushing water, so the concentration enrichment ratio is large, which can significantly improve the concentrate grade. CCF flotation column can be used to deal with black, non-ferrous, non-metallic ore, as well as chemical, paper, environmental protection and other industries in the waste residue, waste liquid. In particular, it is applied to the technological transformation and production capacity tapping of old mining enterprises. "Using intelligent control system to adjust the process parameters such as feeding, discharging and liquid level" can achieve "more, faster, better and less". Technical parameters: Serial Number Specifications (ф D×Hm) Particle size of ore feeding (mm) Concentration of ore feed (%) Capacity (m³/h) Working pressure of bubble generator (MPa) Supporting air compressor power (kW) 1 0.4 × 8/10/12 -0.4 5-50 2-10 0.5-0.6 ≤ 7.5 2 0.6 × 8/10/12 -0.4 5-50 3-11 0.5-0.6 ≤ 7.5 3 0.7 × 8/10/12 -0.4 5-50 4-13 0.5-0.6 ≤ 7.5 4 0.8 × 8/10/12 -0.4 5-50 5-18 0.5-0.6 ≤ 7.5 5 0.9 × 8/10/12 -0.4 5-50 7-25 0.5-0.6 ≤ 7.5 6 1.0 × 8/10/12 -0.4 5-50 8-28 0.5-0.6 11 7 1.2 × 8/10/12 -0.4 5-50 12-41 0.5-0.6 15 8 1.5 × 8/10/12 -0.4 5-50 19-64 0.5-0.6 18 9 1.8 × 8/10/12 -0.4 5-50 27-92 0.5-0.6 30 10 2.0 × 8/10/12 -0.4 5-50 34-118 0.5-0.6 30 11 2.2 × 8/10/12 -0.4 5-50 41-137 0.5-0.6 37 12 2.5 × 8/10/12 -0.4 5-50 49-163 0.5-0.6 55-60 13 3.0 × 8/10/12 -0.4 5-50 75-235 0.5-0.6 55-60 14 3.2 × 8/10/12 -0.4 5-50 82-256 0.5-0.6 75 15 3.6 × 8/10/12 -0.4 5-50 105-335 0.5-0.6 90 16 3.8 × 8/10/12 -0.4 5-50 122-408 0.5-0.6 90 17 4.0 × 8/10/12 -0.4 5-50 140-456 0.5-0.6 110 18 4.5 × 8/10/12 -0.4 5-50 176-562 0.5-0.6 132 19 5.0 × 8/10/12 -0.4 5-50 213-680 0.4-0.6 150 * Note: the height of the flotation column, the amount of aeration according to the different types of minerals, operating points and different.

Keywords: production equipment selection, system manufacturing, upgrading

Classification:

Mineral processing equipment

messages

Product Description

Product Introduction:

CCF flotation column is a new type of high-efficiency non-mechanical stirring aerated flotation equipment with column tank structure. It uses the flow mode of ore particles and fine bubbles in countercurrent and smooth contact, which provides a large number of opportunities for collecting ore particles. The bubbles in the column are small and uniform, the surface area is large, and there are more opportunities to contact with the ore particles under countercurrent conditions, which eliminates the "short circuit" phenomenon of useful minerals in the flotation process, and is conducive to improving the flotation speed and recovery rate. The thickness of the foam layer in the column is large, adjustable, and the cleaning effect of countercurrent flushing water, so the concentration enrichment ratio is large, which can significantly improve the concentrate grade. CCF flotation column can be used to deal with black, non-ferrous, non-metallic ore, as well as chemical, paper, environmental protection and other industries in the waste residue, waste liquid. In particular, it is applied to the technological transformation and production capacity tapping of old mining enterprises. "Using intelligent control system to adjust the process parameters such as feeding, discharging and liquid level" can achieve "more, faster, better and less".

 

Technical parameters:

Serial Number

Specifications (ф D×Hm)

Particle size of ore feeding (mm)

Concentration of ore feed (%)

Capacity (m³/h)

Working pressure of bubble generator (MPa)

Supporting air compressor power (kW)

1

0.4 × 8/10/12

-0.4

5-50

2-10

0.5-0.6

≤ 7.5

2

0.6 × 8/10/12

-0.4

5-50

3-11

0.5-0.6

≤ 7.5

3

0.7 × 8/10/12

-0.4

5-50

4-13

0.5-0.6

≤ 7.5

4

0.8 × 8/10/12

-0.4

5-50

5-18

0.5-0.6

≤ 7.5

5

0.9 × 8/10/12

-0.4

5-50

7-25

0.5-0.6

≤ 7.5

6

1.0 × 8/10/12

-0.4

5-50

8-28

0.5-0.6

11

7

1.2 × 8/10/12

-0.4

5-50

12-41

0.5-0.6

15

8

1.5 × 8/10/12

-0.4

5-50

19-64

0.5-0.6

18

9

1.8 × 8/10/12

-0.4

5-50

27-92

0.5-0.6

30

10

2.0 × 8/10/12

-0.4

5-50

34-118

0.5-0.6

30

11

2.2 × 8/10/12

-0.4

5-50

41-137

0.5-0.6

37

12

2.5 × 8/10/12

-0.4

5-50

49-163

0.5-0.6

55-60

13

3.0 × 8/10/12

-0.4

5-50

75-235

0.5-0.6

55-60

14

3.2 × 8/10/12

-0.4

5-50

82-256

0.5-0.6

75

15

3.6 × 8/10/12

-0.4

5-50

105-335

0.5-0.6

90

16

3.8 × 8/10/12

-0.4

5-50

122-408

0.5-0.6

90

17

4.0 × 8/10/12

-0.4

5-50

140-456

0.5-0.6

110

18

4.5 × 8/10/12

-0.4

5-50

176-562

0.5-0.6

132

19

5.0 × 8/10/12

-0.4

5-50

213-680

0.4-0.6

150

* Note: the height of the flotation column, the amount of aeration according to the different types of minerals, operating points and different.

 

Previous Page

Minerals washing drums

High efficiency tank mixer &Agitators

Next Page

Previous Page

Minerals washing drums

Next Page

High efficiency tank mixer &Agitators

Related Product Recommendation

Exhaust gas scrubbing equipment

Exhaust gas scrubbing equipment

After years of experience, Zhongji Shanhe Technology Co., Ltd. and Changsha Nonferrous Metallurgical Design and Research Institute Co., Ltd. have developed proprietary technology and complete sets of equipment for the characteristics of hydrometallurgical tail gas, which are applied to the treatment of pressure leaching system exhaust steam, so that it can be discharged after reaching environmental protection standards. Specially designed for the "non-condensable gas and steam mixture" discharged from the pressure leaching system, the washing efficiency reaches more than 99%; the complete set of equipment integrates the functions of liquid storage, gas-solid centrifugal separation, and multi-stage washing. It has the advantages of compact structure, high washing efficiency, not easy to block, convenient maintenance, safety and reliability. At present, the technology has been applied to non-ferrous metal smelting, steel plants, new energy raw material smelting enterprises.
Anode cleaning Machine unit

Anode cleaning Machine unit

The main function of the anode cleaning and flapping Machine unit is to transport the anode plate, clean the anode mud with high pressure water and reshape the anode plate. It is one of the core equipment of the zinc electrolysis workshop. For cast zinc electrowinning anode plates that do not need to be flattened, automatic batch chain beating can be carried out, which greatly improves the treatment efficiency of the anode and realizes the automatic operation of the zinc electrowinning workshop equipment.
Electrolysis multi functional automatic overhead crane

Electrolysis multi functional automatic overhead crane

Electrolysis multi-functional automatic line is the most important core equipment in the electrolysis workshop of non-ferrous metal wet smelting process. It is important to automatically lift the cathode and anode plates from the electrolytic cell and the plate access frame to realize the accurate slot and loading of the cathode and anode plates. Our company is the first enterprise in China and even in the world to successfully develop fully automatic zinc electrowinning and lead electrolysis multi-function automatic driving and successfully realize industrial application.
Automatic zinc stripping unit

Automatic zinc stripping unit

The automatic zinc stripping unit is used to remove the cathode plate. A complete set of special equipment for stripping, receiving, conveying, palletizing and weighing the zinc sheet, and washing the cathode plate mother plate at the same time.

online message

Submit immediately